Mohawk MP-Series Mobile Column Lifts
New York Sales & Installations Browse Mobile Column LiftsRequest Quote

Mohawk Lifts MP-18 Series Mobile Column Lift
16,000 lbs. (22″ Forks) / 18,000 lbs. (15″ Forks) Capacity per Column
67″ Lifting Stroke
Stocked Locally in Farmingdale, NY
MOHAWK MP-SERIES Mobile Column LIFT DESIGN
- Mohawk’s MP-Series Mobile Columns are built from heavy 5¾- or 7-inch U.S.-made forklift-channel steel, these columns outlast lifts made from bent sheet metal or tubing.
- Barrel-type roller bearings on the carriages ensure smooth, steady travel with no plastic slide blocks or rollers to wear out.
- Hydraulic actuation provides fast, efficient lifting without the friction of screw drives, and sealed rollers on the base make repositioning the columns quick and easy.
- Standard operation uses 208–240 V three-phase power, with optional 440/460 V or single-phase setups.
60 second lifting speed saves shops time and money. - Communication and electrical cables disconnect at both ends for fast setup and storage, giving shops flexibility whether the lift is stationary or frequently moved.
MOHAWK’S PATENTED INDUSTRY-LEADING Mobile Column LIFT SAFETY SYSTEMS
- Each column includes 19 mechanical lock positions spaced every three inches, starting at 12 inches, plus locking pins on the adjustable forks for secure engagement.
- A low-mounted power unit keeps the center of gravity low for easier maneuvering, while dual pallet-jack style steering wheels drop under load to prevent unwanted movement.
- A manual safety override allows controlled lowering during a power outage—no hand cranks required.
- Mohawk builds the best heavy duty lifts, with the best warranty.
Wireless 24 V DC Operated Models
- For complete portability, Mohawk offers a wireless 24-volt DC version of the MP-Series lift.
- Each column is powered by twin 12-volt, deep-cycle, maintenance-free U.S.-made batteries and equipped with a 20-amp, gel-filled, 110-volt charger for quick recharging.
- A single charge delivers 30 or more full lift cycles while still retaining 75 % battery capacity.
- These battery-operated columns feature the same heavy-duty construction, retractable wheels, adjustable lifting forks, and touchscreen controls as Mohawk’s AC-powered models, providing uncompromised lifting performance without the need for power cords.
100% designed, welded, and manufactured in the U.S.A.
MP-18 15" Forks MP-18 22" Forks Capacity: Capacity per post 18,000 lbs. 16,000lbs Lifting speed: 66 sec. 66 sec. Motor rating (per column) 2.5 H.P. 2.5 H.P. Standard power requirements: 208/240 V or optional 440/480 V 3 phase [single phase option available] OR 24 volt DC operations. Amperage requirements: 10 AMPS (per post AC only) Lifting height (stroke): 67" 67" Lifting mechanism: Direct drive hydraulic cylinders Cylinder protection: Full steel enclosure Clearance between carriage & vehicle: 9 1/8" 8 7/8" Carriage movement: Double sealed roller bearings Synchronization: PLC controlled (Programmable Logic Control) keeps all columns synchronized Lifting forks range: 13" to 24" wheels (wider optional) Lifting fork height/angle: 3 1/2" and 28° 4 1/2" and 40° Maximum tire diameter: 48" or 53" Wide Columns Front wheels: 6" with sealed roller bearings at center Steering system: Pallet jack mechanism, handle and pressure relief valve Mechanical safety locks: 19 positions starting at 12" External hydraulic safety systems: Pressure compensated flow control valving & velocity fuses Electrical safety systems: Electronic sensors in each column Floor requirement: Any hard, level surface (3° max floor slope) Control voltage: 24 volts 24 volts Warranty: 3 YEARS







